AUTOMATION VENDORS SERVE TWO MASTERS?

Over the last few years a number of automation vendors have announced various services including outsourced maintenance, system integration, manufacturing and business process consulting, and remote operations. I wonder if an automation vendor can continue to be effective as both a product company and services provider.

To clarify the difference, let’s start by defining what I mean by services and products. By providing services, automation vendors engage with customers to perform labor and knowledge intensive tasks that may include system design, engineering services, system integration, preventative maintenance, remote operations, and other services. By providing products, automation vendors sell something to the customers, system integrators and engineering firms that they will apply to accomplish automation tasks in manufacturing and process environments.

refer to:http://www.automation.com/portals/factory-discrete-automation/can-automation-vendors-serve-two-masters-products-services

Acrosser unveils its ultra slim fanless embedded system with 3rd generation Intel core i processor

Acrosser Technology Co. Ltd, a world-leading industrial and embedded computer designer and manufacturer, announces the new AES-HM76Z1FL embedded system. AES-HM76Z1FL, Acrosser’s latest industrial endeavor, is surely a FIT under multiple circumstances. Innovation can be seen in the new ultra slim fanless design, and its Intel core i CPU can surely cater for those seeking for high performance. Therefore, these 3 stunning elements can be condensed as "F.I.T. Technology." (Fanless, Intel core i, ultra Thin)

The heat sink from the fanless design provides AES-HM76Z1FL with great thermal performance, as well as increases the efficiency of usable space. The fanless design provides dustproof protection, and saving the product itself from fan malfunction. AES-HM76Z1FL has thin client dimensions, with a height of only 20 millimeters (272 mm x183 mm x 20 mm). This differs from most embedded appliances, which have a height of more than 50 millimeters.

The AES-HM76Z1FL embedded system uses the latest technology in scalable Intel Celeron and 3rd generation Core i7/i3 processors with a HM76 chipset. It features graphics via VGA and HDMI, DDR3 SO-DIMM support, complete I/O such as 4 x COM ports, 3 x USB3.0 ports, 8 x GPI and 8 x GPO, and storage via SATA III and Compact Flash. The AES-HM76Z1FL also supports communication by 2 x RJ-45 gigabit Ethernet ports, 1 x SIM slot, and 1 x MinPCIe expansion socket for a 3.5G or WiFi module.

Different from most industrial products that focus on application in one specific industry, the AES-HM76Z1FL provides solutions for various applications through the complete I/O interfaces. Applications of the AES-HM76Z1FL include: embedded system solutions, control systems, digital signage, POS, Kiosk, ATM, banking, home automation, and so on. It can support industrial automation and commercial bases under multiple circumstances.

Key features:
‧Fanless and ultra slim design
‧Support Intel Ivy Bridge CPU with HM76 chipset
‧2 x DDR3 SO-DIMM, up to 16GB
‧Support SATA III and CF storage
‧HDMI/VGA/USB/Audio/GPIO output interface
‧Serial ports by RS-232 and RS-422/485
‧2 x GbE, 1 x SIM, and 1 x MiniPCIe(for3G/WiFi)

Product Information:

http://www.acrosser.com/Products/Embedded-Computer/Fanless-Embedded-Systems/AES-HM76Z1FL/Intel-Core-i3／i7-AES-HM76Z1FL.html

Contact us：

http://www.acrosser.com/inquiry.html

Introduction to model-based design

With model-based design, UAV engineers develop and simulate system models comprised of hardware and software using block diagrams and state charts, as shown in Figures 1 and 2. They then automatically generate, deploy, and verify code on their embedded systems. With textual computation languages and block diagram model tools, one can generate code in C, C++, Verilog, and VHDL languages, enabling implementation on MCU, DSP[], FPGA[], and ASIC hardware. This lets system, software, and hardware engineers collaborate using the same tools and environment to develop, implement, and verify systems. Given their auto-nomous nature, UAV systems heavily employ closed-loop controls, making system modeling and closed-loop simulation, as shown in Figures 1 and 2, a natural fit.

Testing actual UAV systems via ground-controlled flight tests is expensive. A better way is to test early in the design process using desktop simulation and lab test benches. With model-based design, verification starts as soon as models are created and simulated for the first time. Tests cases based on high-level requirements formalize simulation testing. A common verification workflow is to reuse the simulation tests throughout model-based design as the model transitions from system model to software model to source code to executable object code using code generators and cross-compilers.

Used during system design
Reused as an entry point for software design
Elaborated on during detailed software design (for example, by discretizing continuous time blocks and changing double-precision data to single-precision or fixed-point)
Used as input for embedded code generation

The test cases for system requirement validation likewise are reused on the model, source code, and executable object code to perform functional testing and collect coverage metrics.
While not advocating for any particular mapping, the use and reuse of models for systems and software design along with code generation have long provided UAV system developers using MathWorks products of Simulink and Embedded Coder with streamlined processes. It is nice to see that this same approach is now clearly acknowledged as an acceptable means to certification by the governing standards. MathWorks provides verification tool qualification kits and workflow guidance regarding the use of model-based design for DO-178.

refer to:
http://mil-embedded.com/articles/transitioning-do-178c-arp4754a-uav-using-model-based-design/